SensorTack® 2

Translucent for square-type sensors

photo1

photo2

photo3

photo4

With the 2-component SensorTack® 2 gel and the special shaped refill moulds square-type rain/light sensors can be easily re-used. For the production of translucent sensor pads in original equipment quality and TÜV certified!

Patented formula

No oiling or loss of liquids on the windscreen, even at high temperatures

Minimal costs

Re-use of the old sensor saves purchasing a new one

Proven quality

TÜV certification proves the constant high quality

Constant material properties

Resistant surface, highly elastic

The pad is being molded in identical form and function – it adapts perfectly to the sensor unit. Constant material properties between -40° C and +180° C provide best results in just a few minutes and with maximum form stability.

Replacement has never been easier

How to refit the sensor with SensorTack® 2? Watch our installation video!

SensorTack® FINDER

PMA TOOLS AG

Installation tip

It’s that easy to replace the pad:

Step 1: Release sensor from windscreen and remove old pad completely
Step 2: Clean sensor with SensorTack® cleaning and contact spray
Step 3: Spray SensorTack® 2 refill mould with SensorTack® release spray
Step 4: Place the mould on a level and even surface (Recommandation: SensorTack® heating box)
Step 5: Apply gel to the clean optical surface and let cure for a few minutes
Step 6: Carefully remove refill mould

Sensor can now be reused!

„All SensorTack® products stand out with an enormous elasticity and weather resistance. The material is unfazed by even extreme, continuous heat or UV radiation.“

Alexander Zygmanowski, Head of R & D

Accessories for SensorTack® 2

SensorTack® 2 refill mould
Type 4 or 7/8/10

For the re-use of square-type gel sensors. Gel pads can easily be rebuilt with SensorTack® 2 gel and this unique refill mould.

Dimensions: 57 x 40 mm or 67 x 40 mm

SensorTack® heating box

At low ambient temperatures or in cold weather, 2K silicone products, such as the SensorTack® gel, require additional time to cure.

The SensorTack® box warms the gel and accelerates the reaction time. In addition, it protects against dust and allows the sensor to be positioned completely level when filled with SensorTack® gel.

  • Ideal for mobile fitting
  • Fast curing at any temperature
  • Can be used via cigarette lighter
  • Handy and light

SensorTack® cleaning and contact spray

Ideal pre-cleaner and assembly support for the installation of sensor and camera units. Cleans the camera lens as well as the sensor and glass surface. SensorTack® cleaning and contact spray meets existing OE manufacturer specifications.

  • Cleans the camera lens as well as the sensor and windscreen surface
  • Fine nozzle head
  • Facilitates the installation

Vaporizes rapidly, streak- and residue-free!

4 systems for more than als 750 models:

Do you have any questions?

Here you will find answers!

Write an E-Mail to

or call us under

0049 2154 922230